Front Lights

Busch & Muller have introudced a new range this year to their front dynamo lights - 
the IQ range. The IQ light has a light out put of 40lux compared with less then half 
of that for their first generation LED lights which were very well reviewed at launch. 

This model is avialable with or without a standlight.

Usable with or withour rear light
Integral reflector
Complete with mudguard mounting bolt bracket (pictured)
100,000 hour bulb life

http://www.bumm.de/index-e.html?docu/174q-e.htm  follow this link for a demo

More compact in size and brighter by 50% than the popular IQ Fly range these lights set the standards for the coming years.
The Cyo Plus model has a standlight and is for use with bottle dynamos.

The model has 60 lux output with the light beginning a few feet in front of the bicycle. It does not have an integral reflector - hence the light output is brighter

BML62  -   with Standlight for bottle

BML63  -   with switch & standlight for hub dynamo

BML64  -   with Senso (motion/light sensitive) & standlight for hub

Front lights from Busch & Muller which are supplied with Supravision LEDs. These LEDs have a far brighter light output than conventional halogen bulbs.

• Supravision LED with life expectancy of up to 100,000 hours

• Brilliant white light

• Clear lens design for optimum illumination of the road

• Brackets supplied for both standard and suspension forks

• Extremely compact construction generates light up to a maximum of 17 lx
• No upward dazzling light to the rider
• No loss of light caused by the integral front reflector
• Tools are not required for cable connection and bulb changing
• Integral bi-directional Z-diode prevents bulb failure through over voltage
• Plug contacts for both current and mass (earth)
• Anticorrosive and unbreakable
• With approval D, E, CH and GB
• rrp £15.99

• Features unique design and technology
• Provides excellent illumination of the road, up to 17 lx
• Features an integral front reflector, no loss of light
• No tools required for bulb changing
• Accepts both on and insulated cables and includes a back contact for mass (earth)
• Mounting bracket fit all bicycles

• with standlight technology using an yellow LED and condenser
• No batteries or accumulators required
• Awarded an environmental prize
• Halogen headlight with integral front reflector and electronic standlight
• Provides excellent illumination of the road
• Super bright LED; standlight can be switched off
• Tools are not required for cable connection and bulb changing
• Accepts both plug on and insulated cables and includes a back contact for mass (earth)
• rrp £36.00

• Excellent light output when both riding and stationary
• With automatic, electronic standlight (white LED)
• No batteries or accumulators required
• Provides excellent illumination of the road, up to 17 lx
• Features an integral front reflector, no loss of light
• No tools required for bulb changing
• Mounting brackets fit all bicycles
• Double plug contacts for both the current and mass (earth)

Halogen bicycle headlight

Convenience of sensor technology
A synthesis of quality and design using advanced electronics

• With automatic electronic standlight (using a white LED and condenser) - for added safety when stationary

• The integral light/dark sensor activates the lighting system automatically in the case of darkness and poor light conditions

• The cyclist can choose to switch onto permanent light (i.e. for foggy conditions during daylight) or to switch off completely

Headlights for hub dynamo

• with standlight technology using an yellow LED and condenser
• with switch for hub dynamos
• No batteries or accumulators required
• Awarded an environmental prize
• Halogen headlight with integral front reflector and electronic standlight
• Provides excellent illumination of the road
• Super bright LED; standlight can be switched off
• Tools are not required for cable connection and bulb changing
• Accepts both plug on and insulated cables and includes a back contact for mass (earth)
• rrp £44.00

© Copyright